Duty Drawback
-By M.A AUDITS & ACADEMY
Introduction
Duty Drawback has
been one of the popular and principal methods of encouraging export. It is a
relief by way of refund/ recoupment of custom and excise duties paid on inputs
or raw materials and service tax paid on the input services used in the
manufacture of export goods.
Duty drawback
provisions are given under section 74 and 75 of the Customs Act, 1962. Section
74 allows duty drawback on re-export of duty paid goods. Whereas section 75
allows drawback on imported goods used in the manufacture of export goods. In
order to facilitate the drawback procedures, the Central Government is
empowered to make rules. Pursuant to such power, the Central Government has
issued two rules, i.e., Re-export of Imported goods (Drawback of Custom Duties)
Rules, 1995 and Customs and Central Excise Duties and Service Tax Drawback
Rules, 1995.
Drawback
on re-export of duty paid goods under Section-74
Section 74 of the
Act grants duty drawback upto 98% of the import duty paid on goods, if the
goods are re-exported by the importer. The importer is entitled to drawback
subject to the fulfilment of the following conditions:
a)
Goods are imported into India
by making payment of customs duty;
b)
Goods are identified to the
satisfaction of the Assistant or Deputy Commissioner of Customs as the goods,
which were originally imported;
c)
Goods have entered for export
either on a shipping bill through sea or air, or on a bill of export through
land, or as baggage, or through post and the proper officer should have
permitted clearance of the goods for export;
d)
Goods are entered for export
within two years from the date of payment of import duty (period can be
extended on sufficient grounds being shown). It is to be noted that the time
limit of two years has to be considered from the date of payment of import
duty. Hence, it does not mean the date of importation.
The Central
Government vide the powers conferred under section 74, has notified the
Re-export of Imported goods (Drawback of Custom Duties) Rules, 1995. These
rules prescribes the procedure for claiming drawback and procedure for claiming
drawback on re-exports by Post and through other modes.
Rate
of Drawback
As regards to the
rate of drawback, the Central Government is empowered to fix the rate having
regard to the duration of use, depreciation in value and other relevant
circumstances prescribed by a notification. In this behalf, the Government has
issued notification no.19/65 dated 6-02-1965 as amended. As per this
notification, drawback is not permissible for certain specified goods, such as
wearing apparel, tea chests, exposed cinematographic films passed by Film
Censor Board, unexposed photographic films, paper and plates and x-ray films. Also,
in respect of motor vehicles imported for personal and private use the Drawback
is calculated by reducing the import duty paid according to the laid down
percentage for use for each quarter or part thereof, but upto maximum of four
years.
Following table
enumerates the reduced rate of duty drawback having regard to the duration of
use:
Sl.No.
|
Length
of period between the date of clearance for home consumption and the date
when the goods are placed under Customs control for export
|
Percent
of drawback
|
1
|
Not more than 3 months
|
95%
|
2
|
More than 3 months but not more than
6months
|
85%
|
3
|
6- 9 months
|
75%
|
4
|
9-12 months
|
70%
|
5
|
12- 15 months
|
65%
|
6
|
15-18 months
|
60%
|
7
|
More than 18 months
|
Nil
|
Drawback
on imported materials used in the manufacture of export goods under Section-75
Drawback under
section 75 is different from drawback under section 74. As per section 75,
Central Government is empowered to allow duty drawback on export of goods, where
the imported materials are used in the manufacture of such goods. Unlike
drawback of a portion of the customs duty paid on imported goods, here the main
principle is that the Government fixes a rate per unit of final article to be
exported out of the country as the amount of drawback payable on such goods. Presently,
these rates are of two types, viz., ALL INDUSTRY RATE and BRAND RATE. Further,
the drawback amount depends upon the following factors:
a)
Mode of manufacture,
b)
Quantum of raw material required,
c)
Average content of duty paid
articles in the final product,
d)
Standardisation of final
product conforming to these norms.
It is important
here to note that Drawback is also eligible when imported materials and / or excisable
materials are used in the manufacture of goods to be exported. Such provisions
are given under Customs, Central Excise Duties and Service Tax Drawback Rules,
1995 [Drawback Rules]. The Central Government have framed the Drawback Rules, pursuant
to the powers given under Section 37 of the Central Excise Act, 1944. According
to such rules, drawback is eligible for both customs duty as well as excise
duty, subject to the non availment of Cenvat credits. However, duty drawback of
customs component is eligible irrespective of whether exporter has availed of Cenvat
or not.
Importance
of shipping bill for claiming duty drawback
Shipping bill is
an essential document for claiming duty drawback. In case of exports under
e-Shipping bill, the Shipping bill itself is regarded as claim for duty drawback.
Whereas in case of manual export, the triplicate copy of the Shipping bill is
treated as the drawback claim. Further, there are certain other formalities and
documents required apart from the Shipping bill.
Non
applicability of Drawback scheme
Duty Drawback is not allowed in the
following cases as per the Rule 3 of the Drawback Rules:
a)
if the said goods, except tea
chests used as packing material for export of blended tea, have been taken into
use after manufacture;
b)
if the said goods are produced
or manufactured, using imported materials or excisable materials or taxable
services in respect of which duties or taxes have not been paid; or;
c)
on jute batching oil used in
the manufacture of export goods, namely, jute (including Bimlipatam jute or
mesta fibre), yarn, twist, twine, thread, cords and ropes;
d)
if the said goods, being
packing materials have been used in or in relation to the export of -
(i)
jute yarn (including Bimlipatam
jute or mesta fibre), twist, twine, thread and ropes in which jute yarn predominates
in weight;
(ii)
jute fabrics (including
Bimlipatam jute or mesta fibre), in which jute predominates in weight;
(iii)
jute manufactures not elsewhere
specified (including Bimlipatam jute or mesta fibre) in which jute predominates
in weight.
e)
on any of the goods falling
within heading 1006 or on wheat falling within heading 1001 of the First
Schedule to the Customs Tariff Act, 1975.
Besides the above, duty drawback is not
admissible in the following cases:
a)
if the drawback entitlement is
less than `.50/- [Sec-76(1)(c) of the Customs Act, 1962]
b)
if the market price of export
goods is less than the amount of drawback due thereon [Sec-76(1)(b) of the
Customs Act, 1962]
c)
if product is manufactured
partly or wholly in bond under section 65 of the Customs Act, 1962 because the
duty drawback is not admissible in case of goods manufactured from duty free
inputs
d)
if the product is manufactured
and exported by a 100% EOU in terms of the relevant Import policy; However, as
per para 6.11 of FTP 2009-14, in case of deemed exports, if the DTA supplier
does not claim export benefits, then the EOU/EHTP/STP/BTP Unit shall be
eligible to claim such benefits
e)
if the product is manufactured
and/ or exported by any units in the FTZ/ EPZ or SEZ for the above reason
f)
if the goods are manufactured and
exported in terms of Rule 18 and 19(2)of the Central Excise Rules, 2002 as
these rules provide for rebate of duty, and export in bond on goods on which
duty has not been paid
g)
if the goods exported to Burma,
Nepal, Bhutan, Tibet or Sinkiang as specified in Notification No. 208/77-Cus.,
dtd 1-10-1977
h)
if the amount of drawback is
less than 1% of FOB value (except where the amount of drawback is more than `.500/-) as laid down in Rule 8 of Drawback Rules
i)
the export value of the goods
in the Bill of Export or Shipping Bill is less than the value of imported
materials used in the manufacture of such goods or is not more than such
percentage of the value of such imported material as the Central Government may
notify in this behalf [Rule 8 of the Drawback Rules]
j)
where any drawback has been
allowed on any goods under section 75 and the sale proceeds in respect of such
goods are not received by or on behalf of the exporter in India within the time
allowed under the FEMA, such drawback shallbe deemed never to have been allowed
and the Central Government may, by rules made under sub-section (2), specify
the procedure for the recovery or adjustment of the amount of such drawback.
[Proviso to Sec 75 of the Customs Act]
Conclusion
Duty drawback is a
beneficial provision given under the Customs Act, 1962 and the Drawback Rules,
1995. This financial benefit is in addition to the other benefits given under
Foreign Trade Policy [FTP]. However, drawback is not allowed when the assessee
opts for Advance Authorisation scheme [i.e., purchase of inputs without payment
of duty]. Therefore, it is advisable to analyse all the beneficial options
before choosing any particular option.
No comments:
Post a Comment