Creating Unit of Measurements

Units of Measurement

Stock Items are purchased or sold on the basis of quantity. The quantity is measured by Units. Hence, it is necessary to create Units of Measure. You can have simple units such as numbers, meters, kilograms, and pieces or compound units like box of 10 pieces [1box =10 pieces]

Go to Gateway of Tally > Inventory Info. > Units of Measure

Creating Simple Units of Measure

You can create Simple and Compound units.

Go to Gateway of Tally > Inventory Info > Units of Measure > Create

The Unit Creation screen is displayed as shown.

Creating a Simple Units of MeasureA brief explanation of each field in the Unit Creation screen is given below:

Type

This field will show the Type of Units.

• Simple
• Compound.

Simple units are nos, pcs, etc. Compound unit is a combination of two simple units.

By default Tally.ERP 9 will show the Simple unit for creating the unit of measure.

You can select the Compound Units by clicking on that field or by using SHIFT+TAB [cursor will go to the previous field].

Symbol

Define the symbol of the unit, e.g., Nos. This symbol is used in all displays and printouts.

Formal Name

Specify the formal name of the symbol, e.g. Numbers. This formal name is useful during the consolidation of data of different companies, where the symbols might be the same but are assigned to different units. The formal name will be used to match them.

Number of decimal places

In this field you can specify the decimal places for the Units from 0 to 4. This field is useful for Units measured in fractions.

Example:

Kilogram unit. 1.255 Kgs, here 1 is for Kg and fraction 255 is for gram. For this unit, number of decimal places required is 3.

Displaying a Units of Measure

Displaying a Units of MeasureTo display Units of Measure,

Go to Gateway of Tally > Inventory Info. > Units of Measure > Display

Select the Unit of Measure you would like to view from the Units list. You can select a compound unit or a simple unit from the list.

The Unit Display screen is displayed as shown.

In display mode it is not possible to make any changes.

Altering a Units of Measure

To alter Units of Measure

Go to Gateway of Tally > Inventory Info. > Units of Measure > Alter

Select the Unit of Measure you want to alter from the Units list. The Unit Alteration screen is displayed as shown.

Make the necessary changes and accept Yes to save or Press CTRL+A.

Note: In Alteration mode, you cannot alter the Number of Decimal places field.

You can delete a Unit of Measure from this screen by pressing Alt + D. However, you cannot delete a Unit of Measure that is part of a compound measure. You must delete the compound measure first.

Creating Compound Units of Measure

A Compound Unit is a relation between two Simple Units. Hence, before you create a Compound Unit, ensure that you have already created two Simple Units.

Example:

To Create Compound unit – Doz (Dozen) of 12 Nos (Numbers), you have to create two simple units, Doz (Dozen) and Nos (Numbers) and set the conversion factor as 12.

Go to Gateway of Tally > Inventory Info > Units of Measure > Create

The Unit Creation screen is displayed as shown. Now Click on Type field or Press SHIFT + TAB or Press Backspace Key.

Select Compound from the Types of Units and press Enter. The Conversion field will be displayed for creating Compound unit.

Field Information:

First unit: Select the First unit from the Units List. In the above example, Dozen will be the First Unit.

Conversion: Specify the conversion Factor. In the above example, Conversion factor will be 12.

Second Unit: Specify the Second Unit from the Units List. In the above example, Number will be the Second Unit. This unit is also called Tail Unit.

Use CTRL + A or Accept the Screen for Saving of Compound Unit Creation.